The Dell PowerEdge R240 is an affordable single-socket 1U rack server designed for small businesses and service providers. This 1U rack server features improved performance with 100% more cores, scales with 17% more storage capacity, and protects your server from malicious malware with iDRAC9 Enterprise Server Lockdown mode.
PowerEdge R240 Mounting Equipment
- Slide Rail: 1U Cobra 155-A Dry Slide Rail for Dell
- 4 Post Racks: 19” width, 20”-30” mounting depth
- 2 Post Racks: 19” width, 3”-6” uprights
- Universal Rail: 1U Universal Rack Rails
- 2 Post Fixed Shelf: Light Duty Server Rack Shelf 24″
PowerEdge R240 Mounting Specifications
Chassis Dimensions:
- Length (depth): 22.58” (573.596 mm)
- Width: 17.08” (434.00 mm)
- Height: 1.68” (42.8 mm)
- Weight: 12.2 kg (26.89 lbs) maximum weight
Mounting Requirements:
- U height: 1U
- Rack width: 17.08”
- Mountable depth: 22.58”
PowerEdge R240 Hardware Specifications
- RAM: 4 x DDR4 DIMM slots, Supports UDIMM, up to 2666MT/s, 64GB Max. Supports registered ECC
- Storage: Up to 4 x 3.5 cabled SATA, SAS (optional) or SSD*, Up to 4 x 3.5 or 2.5 hot-plug SATA, SAS (optional) or SSD* (*available in the hot-plug configuration)
- CPU options: 1 processor from the following: Intel Xeon E-2200 product family, Intel Pentium, Intel Core i3, Intel Celeron
- Power: Single 250W (Bronze) or 450W (Platinum) power supply
- Remote management: iDRAC9,iDRAC Direct
PowerEdge R240 Dimensions and Rack Compatibility
The PowerEdge R240 chassis is 1 rack unit in height, has a depth of 22.58 inches and will fit in standard EIA 19 inch racks.
Rails allow for the most efficient use of space when mounting servers. RackSolutions specifically designed a slide rail kit to fit the shoulder screws of the PowerEdge R240.
Universal rails that have a height of 1U and support up to 19.55 inches of depth will be compatible with the PE R240. A benefit of these is the ability to re-use them for different servers or future upgrades. Plus, it’s easy to slide your server in and out of them for maintenance. You can also use our slam latch accessory kit for your Dell servers to be secured in place when using our universal rails. The retaining plate is only compatible with 1U-2U standard width universal rails.
Other products that will be useful when mounting your server can be found here: