The Dell PowerEdge 1950 is designed to provide exceptional performance and availability for organizations that require high-powered processing capability in a space-constricted data center. This 1U rack server combines the right amount of computing power and redundancy in an ultra-dense chassis. Whether you are a large enterprise or a small business, this rack server is ideal for edge of-network, infrastructure, SAN front-end, thin client server and High Performance Computing Clusters (HPCC) applications.
PowerEdge 1950 Mounting Equipment
- Slide Rail: 1U 115-F Fixed Rail for Dell
- 4 Post Racks: 19” width, 20”-30” mounting depth
- 2 Post Racks: 19” width, 3”-6” uprights
- Universal Rail: 1U Universal Rack Rails
- 2 Post Fixed Shelf: 1U 115 2Post Sliding Equipment Shelf 27in Depth
PowerEdge 1950 Mounting Specifications
Chassis Dimensions:
- Length (depth): 31.5” (800 mm)
- Width: 17.0″ (432 mm)
- Height: 1.69″ (43 mm)
- Weight: 29.4 kg (65 lbs) maximum weight
Mounting Requirements:
- U height: 1U
- Rack width: 17”
- Mountable depth: 31.5”
PowerEdge 1950 Hardware Specifications
- RAM: 256MB/512MB/1GB/2GB/4GB Fully Buffered DIMMs (FBD) in matched pairs; 533MHz or 667MHz; 8 sockets for support up to 32GB
-
Storage: Up to 600GB (with 2x 3.5” SAS HDDs)
-
CPU options: Up to two Dual-Core Intel Xeon 5000 sequence processors with up to 3.73GHz clock frequency
-
Power: 670W, optional hot-plug redundant power (1+1)
-
Remote management: Standard Baseboard Management Controller with IMPI 2.0 support; optional DRAC 5/I for advanced capabilities
PowerEdge 1950 Dimensions and Rack Compatibility
The PowerEdge 1950 chassis is 1 rack unit in height, has a depth of 31.5 inches and will fit in standard EIA 19 inch racks.

Rails allow for the most efficient use of space when mounting servers. RackSolutions specifically designed a slide rail kit to fit the shoulder screws of the PowerEdge 1950.

Universal rails that have a height of 1U and support up to 31.5 inches of depth will be compatible with the PE 1950. A benefit of these is the ability to re-use them for different servers or future upgrades. Plus, it’s easy to slide your server in and out of them for maintenance. You can also use our slam latch accessory kit for your Dell servers to be secured in place when using our universal rails. The retaining plate is only compatible with 1U-2U standard width universal rails.


Other products that will be useful when mounting your server can be found here: