The Dell PowerVault NX300 is a rack server that allows you to bring easy, rack-mounted file sharing to your small business or remote offices. This rack server is optimized for storing, sharing, and protecting files and is integrated and ready to go out of the box. For businesses that seek business growth and improved managed file services, this rack server will help you improve the control and compliance over files and growth of your collaborative namespace.
PowerVault NX300 Mounting Equipment
- Slide Rail: 1U Cobra 110-A Dry Slide Rail for Dell
- 4 Post Racks: 19” width, 20”-30” mounting depth
- 2 Post Racks: 19” width, 3”-6” uprights
- Universal Rail: 1U Universal Rack Rails
- 4 Post Sliding Shelf: Fixed Rack Shelf
- 2 Post Fixed Shelf: Light Duty Server Rack Shelf 24″
PowerVault NX300 Mounting Specifications
Chassis Dimensions:
- Length (depth): 24.69″ (627.13 mm)
- Width: 17.09″ (434 mm)
- Height: 1.69″ (42.926 mm)
- Weight: 26.1 kg (57.53 lb) maximum weight
Mounting Requirements:
- U height: 1U
- Rack width: 17”
- Mountable depth: 25”
PowerVault NX300 Hardware Specifications
- RAM: 3GB or 6GB DDR3
-
Storage: Up to 4 x 3.5″ SATA Drives, Up to 4 x 3.5″ Near-Line SAS Drives
-
CPU options: Intel Xeon 5500 Series processor, Xeon E5506 at 2.13 GHz
-
Power: Hot-plug hard drives, Hot-plug power, single non-redundant 250W power supply unit
- Remote management: Dell OpenManage featuring Dell Management Console
PowerVault NX300 Dimensions and Rack Compatibility
The PowerVault NX300 chassis is 1 rack unit in height, has a depth of 25 inches and will fit in standard EIA 19 inch racks.
Rails allow for the most efficient use of space when mounting servers. RackSolutions specifically designed a slide rail kit to fit the shoulder screws of the PowerVault NX300.
Universal rails that have a height of 1U and support up to 25 inches of depth will be compatible with the PowerVault NX300. A benefit of these is the ability to re-use them for different servers or future upgrades. Plus, it’s easy to slide your server in and out of them for maintenance. You can also use our slam latch accessory kit for your Dell servers to be secured in place when using our universal rails. The retaining plate is only compatible with 1U-2U standard width universal rails.
Other products that will be useful when mounting your server can be found here: