The HP Proliant DL360 Gen10 uses dual 2nd Gen Intel Xeon Scalable Processors to provide high performance computing in a 1U package. Its closest relative is the DL380, which offers similar performance but with a higher memory capacity.
This server was marketed towards data centers with demands for virtualization and database computing. One of its key features is the configurability of storage thanks to expandable options and support for a mixture of storage types.
Proliant DL360 Gen10 Mounting Equipment
- Slide Rail:1U Raven 100-A Rail for HP
- 4 Post Racks: 19” width, 20”- 30” mounting depth
- 2 Post Racks: 19” width, 3” – 6” uprights
- Universal Rail: 2U Universal Rack Rails
- 4 Post Shelf: Rack Mount Sliding Shelves
- 2 Post Shelf: Light Duty Server Rack Shelf 24″
- Rack-to-Tower: 1U-2U Universal Rack-to-Tower Conversion Kit
Proliant DL360 Gen10 Mounting specifications
Chassis Dimensions:
- Length (depth): 27.83” (707mm)
- Width: 17.11” (434.6mm)
- Height: 1.69” (42.9mm)
- Weight: 35.86 lbs maximum
Mounting Requirements:
- U height: 1U
- Rack width: 19”
- Mountable depth: 27.83” or greater
Proliant DL360 Gen10 hardware specifications
- RAM: Up to 6TB / 12 x 500GB RDIMM
- Storage: Up to 168.3TB (Hot Plug SFF SAS SSD)
- CPU options: 2x 2nd Generation Intel Xeon Scalable Processors
- Power: 500W, 800W, 1600W Hot Plug Low Halogen Power Supply Kit
- Remote management: HPE iLO 5.0 Remote Management
Proliant DL360 Gen10 dimensions and rack compatibility
The Proliant DL360 Gen10 chassis is 1 rack unit in height, has a depth of 27.83 inches and will fit in standard EIA 19 inch racks.
Rails allow for the most efficient use of space when mounting servers. RackSolutions specifically designed a slide rail kit to fit the shoulder screws of the DL360.
This slide rail kit allows the DL360 Gen10 to be installed in any type of server rack. These rails replace the HP rail kit that would normally come with the sever. This 1U HP rail kit allows the server to be installed in typical 4Post server racks as well as 2Post server racks. These rails are considered a dry slide type. They allow the server to slide in and out, but they are not ball bearing slides. Also, the rails do not include a stop catch mechanism that prevents the server from sliding completely out of the rack when removing it for servicing.
Universal rails that have a height of 2U and support up to 29 inches of depth will be compatible with the PowerEdge DL360. A benefit of these is the ability to re-use them for different servers or future upgrades. Plus, it’s easy to slide your server in and out of them for maintenance.
Other products that will be useful when mounting your server can be found here: