The HPE ProLiant DL140 series is an affordable 1U - dual processor platform equipped with essential - industry-standard server performance features optimized for High Performance Computing environments.
HP ProLiant DL140 Quick Specs
| Height | 1.70″ |
| Width | 16.78″ |
| Depth | 27.75″ |
| Weight | 35lbs |
| Wattage | 653W |
| Voltage | 115-230 VAC, 47-63Hz |
| Heat Dissipation | 2228 BTU/hr |
| Operating Temperature | 50F to 95F |
| Acoustical Noise Emissions | 7.0 bel (70 dB) |
| HP Documentation | DL140 Quick Specs |
HP ProLiant DL140 Quick Rails
The HP ProLiant DL140 is a 1U Rackmount Server. There are currently only three generations of the DL140 which makes this one of the newer classes of HP ProLiant Servers. HP has one of the better 4Post Rail Kits. The HP Rail Kit is a very simple design that will install into most Server Racks.
| Generation | Rail Kit | Notes |
| DL140 G3 | HP Standard 1U Universal Rail Kit |
HP P/N 360104-001 Supports racks with round or square mounting holes. Adjustment range of 22.25″- 37.75″. |
| DL140 G2 | HP Standard 1U Universal Rail Kit |
HP P/N 372918-001 Supports racks with round or square mounting holes. Adjustment range of 22.25″- 37.75″. |
| DL140 G1 | HP Standard Quick-Rails |
HP P/N 348979-B21 Supports racks with round or square mounting holes. Adjustment range of 24″- 31.75″. |
HP DL140 Fixed Rail
- Economically mounts the HP DL140 into any rack
- Does not require HP Rail Kit
- Compatible with any Standard 19″ Server Rack
- Cable Management Crossbar included
Fixed Rail Tech Specs:
| Equipment Depth | The Rack Rails support flange is 23 1/2″ (597mm) long. The Rack Rail will support servers computers or equipment up to 35″ (889mm) deep. |
| Equipment Width | Maximum Equipment Width:17 5/8″ (448mm) 1U Fixed Rails Minimum Equipment Width:16 1/4″ (413mm) |
| Weight Capacity | 1U Fixed Rails Maximum Equipment Weight: 45 lbs. |
| Equipment Mounting | Rack Rails standard thumb screw threads (10-32, 12-24, and metric M6). |
| Construction | The 1U Rack Rail is made of 0.049″ (1mm) steel with a durable zinc plating. |
| Cable Management | Cable management bar included. Velcro® straps provided for securing cables. |
| Hardware | Includes screws, cage-nuts, and nuts for all standard rack types (see below). |
HP DL140 Quick Rail Kit (2Post Relay Rack)
- Mount the HP DL140 into a 2Post Relay Rack
- Require HP Quick Rail Kit
- Compatible with 3″ Upright Relay Racks
- Provides 2U Rackmount Space
The 2Post Conversion Kit provides 29″ of mounting depth as well as the 4 corner attachments that the HP Quick Rails require. This 2Post Conversion Kit will convert your 2Post Relay Rack into a 4Post Rack allowing you to utilize the HP Quick Rail Kit. HP does not manufacture any type of 2Post Rail Kit for the HP Server Line of products. HP utilizes the RackSolutions 2Post Conversion Kits for any type of 2Post installation.
HP DL140 Fixed Rail Relay Rack Kit
- Mount the HP DL140 into a 2Post Relay Rack
- Does Not Require HP Quick Rail Kit
- Compatible with any size Relay Rack
- Provides 1U Rackmount Space
The 1U Fixed 2Post Rail Kit will allow the HP DL140 to be installed in any type of 2Post Relay Rack with the need to purchase the HP Quick Rails. HP relies exclusively on RackSolutions to produce rack mounting kits for 2Post Relay Racks. These products either use the HP Rail Kits like the 2Post Conversion Kits or they will mount the equipment without requiring additional products.